The antihail net is the most important element of the protection system, therefore it must be made using high quality materials and realised with the best technique in order to obtain a very light but resistant and durable sheet. Therefore, the quality of the wire and of the raw materials used are very important, as well as weaving technique: The quality of the wire and raw materials. The wire used by Valente for weaving the antihail nets has only a 0.31mm diameter: this diameter guarantees a resistance of at least 3 kg per wire. Valente antihail net is made using monofilament with a special technique called frame weaving; the weave obtained with this type of processing is 2.8 x 8mm rectangular shape and can not be deformed, that is to say that the size is not altered when the net is subjected to the weight of hail stones.
The pile-covering hoods are inserted with pressure on the top of the upper edge of the pole, to which they perfectly adhere to without sliding off, as the section of the hole is slightly smaller than the pole. As an extra precaution, a screw with an eyelet has been placed in order to definitely fix the hood. The pile-covering hoods are needed for fixing the longitudinal and transversal wires and cables. They are also necessary for protecting the net or plastic film from possible damage caused by the rough surface of the poles.
STRUKTURA NET-HOLDING PLATES
The plates are needed for joining the antihail sheets and to guarantee complete closure of the covering surface. They are made using high quality plastic, guaranteed to resist temperatures varying from +50 and -30 °C and for resisting over time. In particular, the material used in polypropilene in black color have a high resistance characteristics against crashes at low temperature levels and also have notable mechanical characteristics.
ga('create', 'UA-43652955-1', 'valentepali.co.uk');